| Parts Manufacturers : Clark |
| Clark 1911 Pistol Match
Barrels
(100 Series) Made from 4150 steel or 416 stainless steel, heat-treated to 34 to 38 Rockwell. Lugs and hood are oversized for gunsmith fitting. 6" barrel may be cut to fit 4-1/4", 5", and 6" slides. Standard Ramped are available in .45 ACP only. Fully Supported Ramped barrels (R) are available in all popular calibers. Threaded models (T) are threaded .575" - 40 tpi to a length of 2-1/2" from tip of muzzle to fit most cone-style compensators. |
 |
| Clark drop-in 45 ACP OR .400 Cor-Bon barrel.
(130 Series) Drop-In barrel will allow you to shoot the popular new .400 Cor-Bon ammunition. Includes barrel, link and link pin. Available Standard Ramp or Fully Supported Ramp (R). Para Ordnance Owners please note that we no longer offer these as a drop in kit due to some problems with reliability. Tuning is required. |
 |
| Clark Drop-In Barrel/Comp Kit
(165-Series) Completely assembled and ready to drop in your 1911 style pistol. Includes barrel, bushing, link, link pin, and 1" Clark compensator. Available in .45 ACP, 460 Rowland and .400 Cor-Bon. Offered with nonramped or ramped barrel. Para Ordnance Owners please note that we no longer offer these as a drop in kit due to some problems with reliability. Tuning is required. |
 |
| Clark Match Barrel Bushings (170 Series) Machined from 4140 tool steel and 416 stainless steel. Oversize OD for fitting to the slide and undersized ID for fitting to the barrel. For 1911 style pistols. Available in .575 ID, blue and stainless. Available in .555 ID, blue only. |
 |
| Clark Big Bushing (173 Series) Blue or stainless steel. Available for Gov’t, Commander, Officers, Champion, and Compact model pistols. The flange of bushing matches up with outside dimensions of slide. Used for "Meltdown"Ô conversions. Use of the Big Bushing requires installation of a reverse plug. |
 |
| Clark Off-Set Firing Pin Bushings
(190 Series) Elevates point of firing pin strike about .020". Insures center primer hit when accuracy job is performed and barrel is locked-up higher than factory norm. Specify .38 or .45 caliber. Clark Firing Pin Installation Kit. (Part 192) Includes a "G" and 3/16" drill for installation of off-set firing pin bushing. |
 |
| Clark Compensator Blanks
(166 Series) For the "do-it-yourselfer" who has the perfect comp design in mind. blanks are threaded with 5.75 x 40 threads. Available in chrome-moly or stainless steel, standard or heavy profile. The heavy profile blank is drilled for a full length guide rod. Offered in 1-1/2" and 2" lengths. Blanks are not heat-treated. |
 |
| Clark Magazine Guides (Parts 185) Cuts reloading time in half. Designed for 1911 style single stack pistols. Can be installed in seconds using mainspring retaining pin and set screws. Available in blue or stainless. |
 |
| Clark Combat Grip Safeties (Parts 180-181) Allows for higher, more comfortable grip. Spreads recoil over a wider area for more control. Available in blue or stainless. Requires frame alteration. |
 |
| Clark Grip Mount (Part 220) Replaces left grip on 1911 style pistol. Designed to put the scope directly over the bore. Mount clears guns with rib sight attached. Can be used right or left handed. Mount has 2 extra pre-drilled holes with screws for positive anchoring to frame. A liquid metal anchoring kit is also supplied. Complete mounting instructions included. |
 |
| Clark 1911 Slide Mount (221 Series) Designed to be attached to the slide of any Colt Government model style pistol. This mount is interchangeable with the Bo-Mar rib with standard front sight. Available for 5" or 6" slides, with or without cutout for an accuracy tuner. Made of lightweight aluminum. Black only. Also available for Gold Cup slide. |
 |
| Clark Cross Dovetail Front
Sight and Front Dovetail Sight Blanks (Part CLK-230-FDT-BLNK) Fits .300 x 60° cross dovetail slot. Oversized blade allows for custom sizing and design. |
 |
| Clark reverse recoil spring plug without hole(standard guide rod) or without hole(full length guide rod). Available for Long Slide, Government Model, Commander, Champion, Compact and Officers Model. |  |
| Clark, Metalform, Shooting
Star, and Millett magazines |
 |
| Clark Seven Port Compensator Specify caliber |
 |
| Smith & Alexander 1911
Magwells. Blue or stainless |
 |
| Smith & Alexander Para
Magwells. Blue or stainless |
 |
| Clark Custom Carry sights. |
 |
| King Match Aluminum Trigger Lightweight aluminum trigger helps prevent hammer fall with a light trigger pull. Features grooved face for positive fingertip control, stainless steel bows, and overtravel adjustment screw. Furnished with Allen wrench. Requires fitting. |
 |
| Clark Guide Rod Kits Hardened tool steel guide rod makes takedown simpler, eliminates bent recoil springs and improves functioning. Available in 4.25" for Commander, 5" for Gov't Model, 6" for Long Slide, and 6.5" for pistols with full profile compensators. Available with standard or reverse plugs. Reverse plug requires slide alteration. Guide rods and plugs sold separately |
 |
| King Beavertail Grip Safety High, wide beavertail allows shooting hand to be positioned closer to plane of bore and spreads recoil over a broad surface. Top of beavertail has a hammer pocket, allowing Commander or bobbed-spur hammer to sit down in the beavertail when cocked. Available in standard, palm-swell, or checkered palm-swell configurations. Available in blue or stainless. Frame alterations required. |
 |
| King Thumb Safeties Serrated, easy-to-find thumb pads that are longer and wider than factory safety for a faster release. Single and ambi models offered. Available in blue or stainless. Fitting required. |
 |
| Videos Complete 1911 Disassembly /
Reassembly Video Customizing the 1911 for
Bullseye, IPSC, Self-Defense & Improved Accuracy |
 |