I noticed these guys, when I saw their ad in a guns magazine, with which they proclaimed that they produce about 100,000 different holsters. Well, they do, if you consider the number of models they have, the number of different guns their holsters fit, the fact that they come in left- or right-hand version, in several colors etc. Additionally, this company is also marketing the "Signature" holsters of Jim Murnak. Jim's signature holsters are totally handcrafted and the offer the best possible combination of design and execution in the world of holsters. They are the Rolls Royce of the holster world, and they are priced accordingly. Below, are the models they produce:

#12 BASIC

This is your usual belt slide, pancake style holster with unusually beautiful hand boning, hand dying and finishing. It's Hardmolded™ in 8-9 oz. cowhide with a dowel sight clearance.

#7 DROPPED FRONT BASIC

This Jim Murnak design takes our #12 BASIC holster and drops the front from 1-2", depending on the gun. It's HARDMOLDEDTM, hand boned, hand dyed, and beautifully finished in your choice of 8 colors. Belt slots, 1 ?" or 1 ˝".

#9 CLOSE CROPPED BASIC

The Close Cropped Basic is the same holster as the #12 Basic but the belt slots are closer to the gun, making it thinner in its profile. This helps when you wear your gun straight side or have a thin build. The cant and ride are approximately the same as the #12 Basic. The #9 Close Cropped Basic is HARDMOLDEDTM, hand boned, hand dyed, and finished in your choice of 8 colors. You can choose either 1 ?"or 1 ˝" belt slots.

#10 SHORTCUT

This is a classic cut that lets your barrel show through the bottom of the holster. This light-weight, compact holster is hand boned, hand dyed, and Hardmolded™ with a dowel sight clearance. Made of 8-9 oz. cowhide.

#8 CLOSE CROPPED SHORTCUT

The #8 Close Cropped Shortcut is the same holster as the #10 Shortcut, but the belt slots are placed closer to the gun so it has a thinner profile. Sometimes people with thinner builds like a holster that doesn't have too much width. The cant is approximately the same as the #10. It is hand boned, hand dyed, HARDMOLDEDTM, and beautifully finished in your choice of 8 colors. The belt slots can be ordered in either 1?"or 1˝".

#13 SPORT HOLSTER

The Sport Holster is a standard in the industry. It has a reinforced lip for ease in re-holstering and a belt loop behind the holster with a belt slot at the rear of the holster. It is HARDMOLDEDTM it in 8-9oz cowhide, hand boned, hand dyed, and finished it in your choice of 8 colors. You can choose either 1 ?"or 1 ˝" belt slots.

#14 COMBINATION HOLSTER

The combination holster gives the option of putting a pancake style holster like the #12 BASIC inside the pants for more concealment if necessary. The cant remains the same whether the holster is on your belt or inside your waistband. It is Hardmolded™. It is hand boned, hand dyed, beautifully finished, and has a dowel sight clearance. The straps can be adjusted and trimmed to 1?", 1˝", or 1?". Also, this holster can be used with the #50 snap strap and velcro accessory pack.

#15 SUPERSIDE 2 HOLSTER

Jim Murnak originally designed this holster for his signature line. It was an answer to the front flare-out problem of the Sport type holsters. The Superside 2 has a reinforced top and a rounded front for ease of re-holstering, but its real beauty is the front holding belt slot that keeps this holster as close for concealment as a pancake holster. The Superside 2 is HARDMOLDEDTM IN 8-9oz. cowhide, hand boned, hand dyed, and beautifully finished in your choice of 8 colors. Choose 1 ?" or 1 ˝" belt slots. (OPTIONAL TENSION SCREW SHOWN ON GLOCK HOLSTER)

#16 INSIDE-OUTSIDE 2

The Inside-Outside 2 holster is an adaptation of one of Jim Murnak's Signature Line holsters. It allows you to easily put it on and take it off because of the snap straps. Just as easily you can wear it inside the pants without having to change anything on the holster. The straps will accommodate a 1?", 1˝", or 1?" belt.

#18 PADDLE HOLSTER

This Jim Murnak design has a Kydex paddle sandwiched between soft foam cushioned leather. The holster has a leather-reinforced lip and a tension screw. It also has an adjustable cant. It's a copy of Jim Murnak's signature line holster that Dave Spaulding called "the best paddle holster he ever used". It holds your gun close which isn't usual for a paddle holster.

#20 ADJUSTABLE IWB

The adjustable IWB is an inside-the waistband holster with a reinforced lip that was designed to fit you. It is Hardmolded™ with a dowel sight clearance. You can adjust the cant. You can adjust the ride. You can choose from 9 possible positions for your most comfortable fit. Change to snap straps, or even switch to velcro, so no one can see straps on your belt (see #50 snap strap and velcro accessory pack). Another unique feature is the front stabilizer strap. This strap holds the gun in place and keeps the holster in your pants where it's supposed to be when you draw your gun. The belt straps can be adjusted and trimmed for a 1?", 1˝", or 1?" belt. In the picture below, you can see the ways this holster can be used.

#21 NARROW IWB

This holster is an answer to the problem of placing a wide holster in the direct side position. The Narrow IWB has a 3 position cant adjustment and features pull-the-dot snaps and body protector. Straps adjust to fit 1 ?, 1 ˝, and 1 ?" belts.

#40 SMALL OF THE BACK

This small-of-the-back holster is perfect for those who want to carry in this position. Comes with tension screw.

P-SERIES(PLAIN) All of their holsters can be make without hand boning for $10 less, and $5.00 less for mag pouches. These holsters are all still HARDMOLDED™, made of 8-9 oz. leather and come in our 8 beautiful colors.

This is a process in which they mold the holster so that as your belt is tightened, your gun is pulled "Close and Comfortable". Because of this process, the leather becomes rigid enough to accommodate the weight of the gun as well as hold it firmly in the holster until you draw. They make an indentation behind the front of the trigger guard on the backside of the holster so your gun snaps in for a secure fit. We use 8-9 oz. cowhide so the Hardmolding™ lasts. (Thinner leather, seemingly fine at first, will break down under the weight of a gun.)

	COLORS (GENERAL RANGE)

They also produce belts, mag pouches etc.