)
ISP-3 - A holster designed to be worn inside the waistband for deeper concealment. Since the belt rides over the weapon and holster, it aids in controlling how tightly the weapon is held against the body. The pants conceal the bottom of the holster. A leather wing, which extends to the rear along a welt sewn to the face of the holster body, engage the bottom of the belt and lock the holster in place. The holster is attached to the belt by means of a slotted leather pad which is screwed to the reinforced holster mouth. Alternate designs for belt attachment are straps with one way snap or straps with Chicago screws. Suitable for pistols and revolvers. Comfort is largely dependent on the fit of your waistband and the thickness of the weapon.
)
)
)
ISP-SS - An ISP variant without a rear wing or extended bottom. It secures to the belt by your choice of dual straps and one-way snaps or slotted pad. Available in rough side or smooth side out.
)
)
ComTac - A strong side holster designed for competition and casual concealment. the holster has a smooth lining and a belt loop screwed to the backside of the holster body. It rides high and close to the body and does a very good job of supporting the weight of a heavy pistol when combined with a proper gun belt.
)
)
ComTac Lt. Wt. -A lighter weight version of the ComTac. The holster is slightly thinner and lighter because it is unlined. The belt attachments and other features are the same as the ComTac, except the Lt. Wt. has an extra band of leather to reinforce the holster mouth.
)
)
SLP - This holster attaches to the belt by a slot in the wing extending to the rear of the weapon and a tunnel loop behind the weapon. This is a good general use concealment / range holster for pistols or revolvers and may work better than an LP type for people with small waists.
)
SLP-2 -The SLP-2 is an SLP variant with a full length sight track. It is primarily designed for 0 to 8 degrees of muzzle rear rake. This is a good general use concealment / range holster for pistols.
)
)
)
SLP/F - A holster made for women and specifically designed with the assistance of women to be worn forward of the strong side hip with a muzzle forward rake. The holster has an extended and slimmed down wing to the rear of the weapon. The rear belt loop is formed by a tongue of leather that wraps around the belt and secures to the outside of the wing. This method reduces the leather bulk at the belt attachment so as to reduce the chance of discomfort at the top of the hip. There is a second tunnel loop behind the weapon. Most women find the holster comfortable, concealable, and fast. It works best with shorter barreled pistols.
)
LP - A holster designed to be worn on the strong side just beside the hip. The weapon rides outside the belt. The holster attaches to the belt by two slots in extended wings in front of and to the rear of the weapon, which pulls the holster closer to the body. This model a good choice for those needing a comfortable, general use concealment holster for pistols and revolvers.
Features: Available with or without an indexing pad (sometimes called a sweat shield).
)
LP-QS - A holster similar in design to the LP, except that the wings fore and aft have been narrowed and attach to the belt by means of straps with one way snaps for quick removal. This holster is also available with screws instead of the snaps.
)
LP-QS - A holster similar in design to the LP, except that the wings fore and aft have been narrowed and attach to the belt by means of straps with one way snaps for quick removal. This holster is also available with screws instead of the snaps.
)
LP-QS - A holster similar in design to the LP, except that the wings fore and aft have been narrowed and attach to the belt by means of straps with one way snaps for quick removal. This holster is also available with screws instead of the snaps.
)
LP-HTL - Another LP variant. Like the LP-QS, the belt loops are formed by leather tongues. In the LP-HTL model, the tongues don't loop all the way around the wings. They wrap over the top of the belt and are screwed to the bottom of the rear of the wing to form the belt loop. This system enables the holster to ride as low on the belt as possible and the deeper wings work to stabilize short muzzle pistols a little better that the LP-QS.
)
LP-HTL - Another LP variant. Like the LP-QS, the belt loops are formed by leather tongues. In the LP-HTL model, the tongues don't loop all the way around the wings. They wrap over the top of the belt and are screwed to the bottom of the rear of the wing to form the belt loop. The holster shown uses exposed chicago screws. This system enables the holster to ride as low on the belt as possible and the deeper wings work to stabilize short muzzle pistols a little better that the LP-QS.
)
BPB - A holster designed to ride under the belt but outside the waistband. Since the belt rides over the weapon and holster, it aids in controlling how tightly the weapon is held against the body. As a result, the weapon conceals nearly as well as with an inside the waistband holster and is more comfortable for most people. Positioning on the waist is dependent on pant belt loop placement. Mainly Suitable for pistols.
)
)
BPB Snap-on - This holster is designed primarily for small autos. It rides under the belt with the rear wing inserted into a pants belt loop. The loop of the holster is then snapped around the belt. To remove the holster, the loop is unsnapped and the rear wing of the holster is then rotated out of the pants belt loop.
)
SR - Includes horizontal ride holster with thumb snap, horizontal ride double magazine carrier with tension screws, hand cuff carrier and adjustable harness. Customer requested two tone shown.